ESA Electronic Engineering
Model: BE

1 line BUS-SYSTEM (12 remote units of 8 electrovalve sfor each line.)

Display 3 Digit

Alarm max dP

 > Documentation Full
 > Documentation Basic
 > Standard Setting
     See the video
 > Secondary Setting
     See the video
Supply voltage 230 VAC - 115 VAC / 50 ÷ 60 Hz Fuse 250 V / 1 AT (5 x 20)
(On request) 24 VAC / 50 ÷ 60 Hz Temperature -10 ÷ +50 °C
(On request) 24 VDC Degree protection IP65
Output voltage for electrovalves 24 VAC, 115 VAC, 230 VAC / 50 ÷ 60 Hz, 24 VDC Dimensions 130x180x75 mm
Power consumption 10 VA (Stand by)
30 VA Max with ev ON
Weight 1.5 Kg
AL1 Alarm relay contacts open
B10c Manual activation of every single output from keyboard
B1c Select Number of outputs
B2x Activation time from 0.05 to 5.00 sec.
B3x Interval time from 1 to 999 sec.
B8a Short-circuit protection of every single output
C0 ENABLE / DISABLE inputs from external contact
C13_10 dP full range 10.00 kPa
C1d Differential pressure digital control
C3 Differential pressure readout from internal transducer (max 10 kPa)
C7d1 Maximum dP alarm. Contact open with alarm. Automatic reset.
C8 dP zero readout regulation
D1b1 Additional post-cleaning cycles from dP readout. Activation at STOP.
D6 ON/OFF Cleaning cycle from external contact.
DPa 6x4 RILSAN air connections
G1 Maximum load power 25W per output
HVA Input voltage selection