ESA Electronic Engineering
Model: GE

Max 2 linee BUS-SYSTEM ( 12 remote units of 8 electrovalve sfor each line.)

LCD alphanumeric display, 32 characters, multilanguage

Operation hour counter

 > Documentation Full
 > Documentation Basic
 > Standard Setting
     See the video
 > Secondary Setting
     See the video
TECHNICAL FEATURES
 
Supply voltage 230 VAC - 115 VAC / 50 ÷ 60 Hz Fuse 250 V / 1 AT (5 x 20)
(On request) 24 VAC / 50 ÷ 60 Hz Temperature -10 ÷ +50 °C
(On request) 24 VDC Degree protection IP20
Output voltage for electrovalves 24 VAC, 115 VAC, 230 VAC / 50 ÷ 60 Hz, 24 VDC Dimensions 96x96x152 mm
Power consumption 10 VA (Stand by)
30 VA Max with ev ON
Weight 1.5 Kg
 
STANDARD FEATURES
 
A1b Minimum (K1) and maximum (K2) dP alarms on separate relays
A2a Relay Voltage ON (K1)
AL1 Alarm relay contacts open
B10a Manual activation of every single output from keyboard
B1b Selection Number of outputs
B2x Activation time from 0.05 to 5.00 sec.
B3c Interval time between ev. during post-cleaning
B3x Interval time from 1 to 999 sec.
B8b Short-circuit protection of every single output
C0 ENABLE / DISABLE inputs from external contact
C4c Cleaning cycle
C6a ON/OFF cleaning cycle from external pressure switch. STOP at the end of the cycle
D14a Operation hour counter
D1a3 Additional cycles from voltfree contact. ALWAYS enabled.
D6a ON/OFF cleaning cycle from external contact
G1 Maximum load power 25W per output
SL Multilanguage display