ELECTRONIC TECHNOLOGIES
ENVIRONMENTAL PROTECTION

 CODE
ESA Electronic - ASCO
SEQUENCER WITHOUT DIFFERENTIAL PRESSURE CONTROL: LSC
 
ESA CODE by model LSC   
 
 
  Select number of outputs A2b - Relay voltage ON (K3)  
  A3a - Relay K1 Cycle ON / OFF contact. Closed with active cycle  
  Select power supply voltage B9b - Short-circuit protection of every single output for sequencer P  
  D11 - Emission control by TRIBO-CHECK probe.  
  Select voltage for solenoid valves G2 - Control of 2 solenoid valves on each output (2 x 25 W Max)  
       
 
      REGISTER TO SEE PRICES
 
Info Code Description
 
A2a Relay Voltage ON (K1)
B10 Manual activation of each single output from the keyboard
B1b Select Number of outputs
  B2x Activation time from 0.05 to 5.00 sec.
B3c Interval time between ev. during post-cleaninges
B3x Interval time from 1 to 999 sec.
B8b Short-circuit protection of every single output
C0 Input activation from external contacts
C4c Cleaning cycle
C6a ON/OFF cleaning cycle from external pressure switch. STOP at the end of the cycle
D14a Operation hours-counter
D1a3 Additional cycles from voltfree contact. ALWAYS enabled.
D6a ON/OFF cleaning cycle from external contact
FP50 Front panel with 50 cm. flat cable
  G1 Maximum load power 25W per output
HVB Input and output voltage selection (WARNING See B8c)
SL Multi language display
 
  • LCD alphanumeric display 32 characters multilanguage
  • Italian, English, French, German, Spanish
  • Supply voltage: 115 VAC ÷ 230 VAC / 50 ÷ 60 Hz (Standard)
  • Supply voltage (On request): 24 VAC / 50 ÷ 60 Hz - 24 VDC
  • Voltage electrovalves: 24 VAC, 115 VAC, 230 VAC / 50 ÷ 60 Hz, 24 VDC
  • Operating temperature: - 10 ÷ + 50 °C (Standard)
  • Manuals available in Italian, English, French, German,Spanish
  • For other languages contact the Technical Department